

Water Hammer Arrestors 250PSI
The Water Hammer Arrestor 250PSI is a practical plumbing device designed to absorb the damaging surge pressures that occur when a valve closes suddenly in a water pipe. Installed in a water distribution system, it helps to prolong the service life of valves, piping, equipment and appliances. This Type AA model is intended for point of use residential appliance applications.
It is built from Type L copper tube with lead-free brass, using forged brass fittings, an NSF approved POM piston, NSF approved O rings with an FDA approved silicon lubricant and lead-free solder. The surface is polished and varnished for a lasting shine. The arrestor has a maximum pressure of 250PSI and an operation pressure of 60PSI, and it operates across a temperature range from 0.5°C to 82°C. Available in sizes from 1/2 inch to 3/4 inch, it has NPT, BSPT or BSP male thread connections. System pressure above 60PSI requires a pressure reducing valve. The Water Hammer Arrestor 250PSI offers practical installation and dependable protection for residential water systems.












