Water Hammer Arrestors 400 PSI

SKU: HC-1325Y Category:

The Water Hammer Arrestor 400PSI is a practical plumbing device designed to absorb the damaging surge pressures that occur when a valve closes suddenly in a water pipe. Installed in a water distribution system, it helps to prolong the service life of valves, piping, equipment and appliances. The Type A to F sizes are intended for commercial use.

It is built from Type L copper tube with lead-free brass, using forged brass fittings, an NSF approved POM piston, NSF approved O rings with an FDA approved silicon lubricant and lead-free solder. The surface is polished and varnished for a lasting shine. The arrestor has a maximum pressure of 400PSI and an operation pressure of 60PSI, and it operates across a temperature range from 0.5°C to 82°C. Available in Type A to F, covering sizes from 1/2 inch to 2 inches, it has NPT, BSPT or BSP male thread connections. System pressure above 60PSI requires a pressure reducing valve. The Water Hammer Arrestor 400PSI offers practical installation and dependable protection for larger commercial water systems.

Product Overview

Size
1/2" to 2"
Pressure
400 PSI
Material
Copper / lead-free brass
End Connections
NPT/BSPT/BSP male thread
Temperature
0.5°C to 82°C
Standards
BS EN10226-2; ISO7-1
Category
Plumbing
Valve Type
Water Hammer Arrestor

Product Downloads

Datasheet
Datasheet
Installation Instructions
Installation Instructions
Certification
Certification
Testing Report
Testing Report
Packaging Video
Packaging Video
Testing Video
Testing Video

Related products